SPECIFICATIONS

• Up to 16 feet of travel
   

• 115 volt AC relay logic operation
   

• Wheelchair Cab is a generous 30 in. x 46 in. x 78 in. 
  (762 mm x 1,168 mm x 1,981 mm) and can be custom sized
   

• 115 V AC up travel, 12 V DC down
   

• Automatic battery recharging system (115 V AC)
   

• Low voltage controls
   

• 2:1 chain hydraulic drive system
   

• Keyes call and send stations (keyed for safety!)
   

• Non-skid platform surface
   

• Plexiglass windows 1/4 (6 mm) inch thick!
   

• Time delay for automatic door lock system
   

• Wheelchair lifter conforms to all ASME A18.1 and 
  CSA-B613 specifications
   

• Adjustable top floor presence sensor built into the cab 
  (cab will not go up if someone is standing on the top floor)
   

• Electro-mechanical door lock and open door sensor
   

• Under panel safety sensor ( wheelchair lifter will not 
  descend if anyone or anything is beneath the platform )
   

• Emergency stop and alarm
   

• Emergency lowering
   

• Fully enclosed drive tower for safety and aesthetics
   

• Pressure relief valve to prevent platform overload
   

• Slack chain safety device
   

• Telephone in cab, easily accessible from your wheelchair.
   

• Halogen light in cab
   

• Many, many custom options available